Body
| Build Volume (W*D*H) | 330mm*320mm*325 mm |
| Chassis | Aluminum and Steel |
| Outer Frame | Plastic |
Dimensions and Weight
| Physical Dimensions | 544mm*529mm*505 mm |
| Net Weight | 12.8 kg |
Toolhead
| Extruder Gear | Hardened Steel |
| Nozzle | Stainless Steel |
| Max Nozzle Temperature | 300 ℃ |
| Supported Nozzle Diameter | 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm |
| Filament Cutter | Built-in |
| Filament Diameter | 1.75 mm |
| Extruder Motor | Servo Extruder Motor |
Heatbed
| Build Plate Material | Flexible Steel Plate |
| Included Build Plate Type | Textured PEI Plate |
| Supported Build Plate Type | Textured PEI plate, Engineering Plate, Cool Plate SuperTack |
| Max Heatbed Temperature | 80 ℃ |
Speed
| Max Speed of Toolhead | 500 mm/s |
| Max Acceleration of Toolhead | 10 m/s² |
| Max Flow for Hotend | 28 mm³/s (Test parameters: 150 mm round model with a single outer wall; Bambu Lab PLA Basic; 220 °C printing temperature) |
Cooling
| Part Cooling Fan | Closed Loop Control |
| Hotend Cooling Fan | Closed Loop Control |
Supported Filament Type
| PLA，PETG，TPU，PVA | Suitable for Printing |
| PLA-CF、PETG-CF | Suitable for Printing (Replace with Hardened Steel Nozzle) |
Sensor
| Camera | Low-frame-rate camera, up to 1080P, supports timelapse photography |
| Filament Run Out Sensor | Supported |
| Filament Tangle Sensor | Supported |
| Filament Odometry | Supported |
| Power Loss Recovery | Supported |
| Clumping Detection | Supported |
Electrical Requirements*
| Voltage | High-voltage Version: 200-240 VAC, 50/60 Hz Low-voltage Version: 100-120 VAC, 50/60 Hz |
| Max Power* | High-voltage Version: 1000 W@220 V Low-voltage Version: 1000 W@110 V |
Environment Requirement
15 - 30 ℃
Electronics
| Touchscreen | 3.5 inch, 240*320 Touchscreen |
| Storage | 32g MicroSD Card |
| Control Interface | Touchscreen, mobile App, PC App |
| Motion Controller | Single-core Cortex-M4 Processor & Single-core Cortex-M7 Processor |
| Communication | Wi-Fi，Bambu-Bus |
Software
| Slicer | Bambu Studio Supports third-party slicers which export standard Gcode, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported. |
| Supported Operating System | MacOS、Windows、Linux |
Network Control
| Ethernet | Not Available |
| Wireless Network | 2.4G Wi-Fi |
Wi-Fi
| Operating Frequency | 2412 - 2472 MHz (CE/MIC) 2412 - 2462 MHz (FCC) 2400 - 2483.5 MHz (SRRC) |
| Wi-Fi Transmitter Power (EIRP) | <23 dBm (FCC)，<20 dBm (CE/SRRC) |
| Wi-Fi Protocol | IEEE 802.11 b/g/n |
Cutting Module
| Cutting Area | 300 mm * 300 mm |
| Drawing Area | 300 mm * 255 mm |
| Supported Pen Diameter | 10.5 mm–12.5 mm |
| Cutting Mat Type | LightGrip and StrongGrip Cutting Mats |
| Blade Type | 45°*0.35 mm |
| Blade Pressure Range | 50 gf–600 gf |
| Max Cutting Thickness | 0.5 mm |
| Blade and Pen Recognition | Supported |
| Cutting Mat Type Detection | Supported |
| Supported Image Type | Bitmap and Vector Images |
| Supported Material Type | Paper, PVC, vinyl, leather, and more |
*The printer's voltage specifications vary by sales region. Before use, check the label next to the power socket to ensure the supply voltage matches the indicated voltage.
*To ensure the heatbed quickly reaches the needed temperature, the printer will maintain maximum power for about 3 minutes.