Printing Technology
Fused Deposition Modeling
Body
Build Volume (W*D*H)
256mm*256mm*256mm
Chassis
Plastic and Steel
Outer Frame
Plastic and Glass
Physical Dimensions
Physical Dimensions
392mm*406mm*478mm
Net Weight
14.9 kg
Toolhead
Extruder Gear
Hardened Steel
Nozzle
Hardened Steel
Max Nozzle Temperature
300 ℃
Included Nozzle Diameter
0.4 mm
Supported Nozzle Diameter
0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter
Built-in
Filament Diameter
1.75 mm
Extruder Motor
Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Build Plate Material
Flexible Steel Plate
Included Build Plate Type
Textured PEI Plate
Supported Build Plate Type
Textured PEI plate, Smooth PEI Plate, Cool Plate SuperTack
Max Heatbed Temperature
110 ℃
Speed
Max Speed of Toolhead
600 mm/s
Max Acceleration of Toolhead
20.000 mm/s²
Max Flow for Hotend
40 mm³/s
(Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 ℃ printing temperature)
Filtration
Filter Type
Activated Carbon
VOC Filtration
Supported
Particulate Matter Filtration
Supported
Cooling
Part Cooling Fan
Closed Loop Control
Cooling Fan for Hotend
Closed Loop Control
Auxiliary Part Cooling Fan
Closed Loop Control
Filament Supported
PLA, PETG, ABS, ASA, TPU, Support for PLA, Support for PLA/PETG, Support for ABS, PET, PA, PC, PVA, PLA-CF, PETG-CF, ABS-GF, ASA-CF, PA6-CF, PA6-GF, PAHT-CF, PPA-CF, PET-CF
Sensor
Camera
Built-in; 1920*1080; 30 fps HD
Door Sensor
Supported
Filament Run Out Sensor
Supported
Filament Tangle Sensor
Supported
Filament Odometry
Supported with AMS
Power Loss Recovery
Supported
Electrical Requirements
Voltage
100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power*
1200 W@220 V / 1000 W@110 V
PLA Steady-State Power
200 W@220 V / 200 W@110 V（PLA printing）
Working Temperature
10 °C–30 °C
Electronics
Touchscreen
5-inch 854*480 Touchscreen
Storage
Built-in 8 GB EMMC and USB Port
Control Interface
Touchscreen, mobile App, PC App
Motion Controller
Dual-core Cortex-M4 and Single-core Cortex-M7
Application Processor
Quad-core 1.5 GHz ARM A7
Neural Processing Unit
2 TOPS
Software
Slicer
Bambu Studio
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System
MacOS, Windows, Linux
Network Control
Ethernet
Not Available
Wireless Network
Dual-Band Wi-Fi
Network Kill Switch
Not Available
Removable Network Module
Not Available
802.1X Network Access Control
Not Available
Wi-Fi
Operating Frequency
2412 - 2472 MHz, 5150 - 5850 MHz (FCC/CE)
2400 - 2483.5 MHz, 5150 - 5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP)
2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol
IEEE 802.11 a/b/g/n
* To ensure the heatbed quickly reaches the needed temperature (35-110℃), the printer will maintain maximum power for about 3-5 minutes.