top of page
XiaoMi Robot Vacuum Mop X10+

Share : 

XiaoMi Robot Vacuum Mop X10+


Robot Vacuum Specifications :

  • Model - B101GL
  • Dimensions - 350 x 350 x 97mm
  • Rated voltage - 14.4V⎓
  • Rated voltage - 1  -  14.4V - 1
  • Rated voltage - 2  -  14.4V - 2
  • Rated power - 70W
  • Net weight - 3.8kg

All-in-one Station Specifications :

  • Model - JZ2202
  • Dimensions - 423 x 340 x 568mm
  • Rated input - 220–240V ~ 50/60Hz
  • Rated output - 20V ⎓ 2A
  • Dust collection power - 1000W
  • Drying + Charging power - 90W
  • Cleaning power - 55W
  • Water resistance rating - IPX1
  • All-in-one station net weight - 8.3kg


Sensor List :

  • Drop sensor
    Used to detect steps and drops
    Robot will back up when the sensor detects a drop in height against typical media of approximately 85mm (white) or 15mm (black)
  • Ultrasonic sensor
    Used to identify carpet material
    When the sensor detects a carpet signal, depending on user settings either the suction power is increased, or the mop cloth is raised or positioned to avoid the carpet.
  • LDS laser sensor
    Used in image formation
    Able to measure object distances in the range of 0.12m–6m
  • Line laser sensor
    Used to detect small obstacles
    Able to detect obstacles in the 20–600mm range
  • AI Visual identification sensor
    Used to detect certain obstacles and furniture. No room attribute recognition capabilities.
    Used to detect object type. Field of view: horizontal 90°, vertical: 75°
  • Extended edge sensor
    Used along the wall
    Used to maintain a consistent distance from the wall of 0–1.5cm
  • IMU Sensor
    Robot vacuum motion status detection
    Motion can be detected in the following areas: Acceleration ranges ±2g/±4g/±8g/±16g Gyroscope ranges from ±125°/s to ±200°/s
  • Drive wheel lift sensor
    Used to detect if drive wheel is off the ground
    Detects if wheel is raised and triggers drive wheel stall if raised in motion
  • Air pressure sensor
    Test for dust collection capacity and blocked ducts
    Detects pressure in the dust channel between 300–1250hPa and alerts user if duct blockage is identified


What's in the box :

  • Robot vacuum x1
  • All-in-one station base x1 (Includes dust bag, clean water tank, dirty water tank, wash plates)
  • Main brush x1 (Installed)
  • Brush cover x1 (Installed)
  • Dust bag x1 (Replacement)
  • Dustbin x1 (Installed)
  • Pads x2 (Installed)
  • Pad plates x2
  • Side brush x1
  • Cleaning tool x1
  • Power cable x1
  • User manual x1
bottom of page